Elite E10

Yorkville: élite
E10 - Speaker - 200w, 10 inch / 1 inch

The two-way E10 loudspeaker is one of the first in a new series of élite cabinets designed and built for maximum versatility in multiple applications. One of the best sounding ultra-compact cabinets in the market, the E10 is a new concept in loudspeaker cabinet design.
Ideal for any small PA rental house, installer or sound company, these loudspeakers may replace a number of specific application cabinets in any inventory.

Features

The E10 is loaded with 100° x 25° ABS Waveguide horn assembly. A modified trapezoidal shape and recessed input jack panel and handle means the E10 cabinet can function perfectly as a wedge monitor or front-of-house loudspeaker. Unlike some ‘multi-function’ loudspeakers currently in the marketplace, great care has been taken in the design process to ensure that élite cabinets will perform without compromising functionality as either a monitor or a front-of-house enclosure. Neither application was considered as an afterthought.
Integrated stand mount adapters and flyware means the E10 can be utilized in any permanent install or touring application. In addition, the modified cabinet shape means the élite E10 can be installed much closer to vertical surfaces and in some cases, under balconies in tight locations, and can be arrayed in a much tighter less obtrusive cluster.

When used with the EP10 processor, the E10 can be easily used with any élite series subwoofer.

E10 - Black Ozite (Carpet) Finish
E10B - Black Ultrathane (Painted) Finish

Specifications

System Type Two Way
Active or Passive Passive
Program Power (Watts) 200
Biampable No
Nominal Impedance (Ohms) 8
Sensitivity (dB @1Watt/1m) 100
Max SPL (dB) 123
Frequency Response (Hz +/- 3db) 65 - 18k
Crossover Frequency (Hz) 2900
Driver Configuration 10 inch / 1 inch
HF Driver(s) 1 inch throat (1 inch Titanium Diaphragm)
HF Horn ABS Waveguide
HF Dispersion (°H x °V) 100 x 25
HF Protection CTL™
LF Driver(s) 10 inch (2 inch voicecoil)
Inputs - 1/4" Jacks 2
Inputs - Speakon 4-pin 2
Flying Hardware 3/8 inch x 3 (2 Top / 1 Back)
Bar Handles 1
Pole Mount Adapter (1 3/8"-3.5cm) Yes
Enclosure Materials 15mm (5/8inch) 11-ply Russian Birch
Grille Perforated Metal
Covering / Finish Black Ozite (Carpet)
Optional Covering / Finishes Black Ultrathane Paint (E10B)
Processor (optional) EP10
Dimensions (DWH xbackW, inches) 12 x 13 x 18.5 x 5.5
Dimensions (DWH xbackW, cm) 30 x 33 x 45 x 14
Weight (lbs/kg) 28.2 / 12.8